I just down loaded the last bin. I put it on my USB drive at in stalled like normal. When it reboot the desplay reads CrC1. I have nothing. I tried the on off in the back. I disconnected the dish and tried to reboot. No luck. Before I try this program on my other box. I would like to see how to fix this box. The bin is VSPRO-080814A-II.all. Any help?
CrC1 desplayed on VSPRO
- Thread starter skyenergy
- Start date
CASPER
New member
When asking a question,you should follow these minimum requirements
1.What Satellites you are aiming at.
2.Your Receiver Brand/Model
3.What version of software you have loaded on it,
("the latest version" is NOT an acceptable answer)
4.What dish and lnb type you have.
("a plain lnb" is not a proper answer)
5.Any switches you have inline. (name the brand/type)
6.What settings you currently have setup.
7.What you have tried so far(Detailed steps)
8.Other things pertinent to your specific question
may also be needed and included.
1.What Satellites you are aiming at.
2.Your Receiver Brand/Model
3.What version of software you have loaded on it,
("the latest version" is NOT an acceptable answer)
4.What dish and lnb type you have.
("a plain lnb" is not a proper answer)
5.Any switches you have inline. (name the brand/type)
6.What settings you currently have setup.
7.What you have tried so far(Detailed steps)
8.Other things pertinent to your specific question
may also be needed and included.
I double checked. The program that I down loaded was the one you posted for the VSPRO. I checked and it is VSPRO-080814A-II.all. Your bins allways work for me in the past. Do I need to hook directly to my computer and load the factory bin? I am using the DN500Pro dish with the viewsat pro receiver that has VSPro_V106 Factory file. I am looking at Ecostar 119 and 110 satlights DN. As far as what I tryed is what I posted last. I looked threw old post to see if anyone eles had this code before. I will keep looking.
Last edited:
CASPER
New member
there are two files there one https://preferredbypete.com/viewsat-pro-files/6333-viewsat-pro-ii-august-14-2008-a.html
and the other is mine. the one below...
https://preferredbypete.com/viewsat-pro-files/6335-vspro-080814a-zip-3-02mb.html
the one you downloade is not mine which is VSPRO-080814A-II
and the other is mine. the one below...
https://preferredbypete.com/viewsat-pro-files/6335-vspro-080814a-zip-3-02mb.html
the one you downloade is not mine which is VSPRO-080814A-II
Casper,
I am still down with the same code showing. I will try and explain what I have tried.
First. I hooked up to to my computer threw the com port. I opened the vspro loader. I tried to load the vspro-v106 factory file. The program ask to reset the stb. I reset but no go.
Second. I went back on line and looked around. I saw that you posted a fix program for the vspro that are dead. I can not unzip the rar files. I might not have the right program. I only have winzip. Do you have any directions on the three files you posted. And, do you recomend a good program for the rar files.
Thank you for your help.
I am still down with the same code showing. I will try and explain what I have tried.
First. I hooked up to to my computer threw the com port. I opened the vspro loader. I tried to load the vspro-v106 factory file. The program ask to reset the stb. I reset but no go.
Second. I went back on line and looked around. I saw that you posted a fix program for the vspro that are dead. I can not unzip the rar files. I might not have the right program. I only have winzip. Do you have any directions on the three files you posted. And, do you recomend a good program for the rar files.
Thank you for your help.
