Dish 500/Pansat 2700a- I moved now theres zero quality

[gunthagunth]

I had this fta setup working great. I got lazy and stopped updating my box until recently when I moved. I moved about a half mile down the road so I took the dish and set it up again. I leveled out the mast. I kept the skew at the same that it was along with the elevation. I am trying to hit echo 8 and 7.

I have a dish 500 along with LNBF PN: 150782
I have my pansat 2700a box which I have not loaded anything in the past 6 months until yesterday when I loaded the newest fix (X-87BL_080102_B75_235_api_fixed.bin).
I have 99%level and 0% quality on all transponders. I have scanned all around the sky slowly at different elevations and cannot pickup any transponder. I am figuring it is a problem with my box setup.

I have one of the coax cables from the LNB run into the box to the IF input spot. I have these settings under antenna setup.
Echo 7
LNB type standard
LNB Local-freq. 11250
22kHz Off
DiSEqC #3
Legacy SW none
Skew 0
TP 20
Positioner setting disable


Echo 8.6
LNB standard
lnb local-freq 11250
22kHz off
DiSEqC #2
Legacy SW none
skew 0
TP 1
Positioner setting disable

If anyone sees anything that may be off I would appreciate any help. I dont have any channel lists loaded. Only loaded the single fix. I remember there used to be a blacklist guide that rebooted back to the original and then you had to download a updated fix, then you could install the latest fix. Not sure if that is my problem. Thanks ~Jason

 

[hichman]

help with ppv channels

i just got the system about 3 days ago and i need a little bit of help. on some of my paperview channels it says you have to other the movie for $3.99 and i dont have those channels. i dont even have cartoon network. am i supposed to have all my paper view channels or am suppose to just have a few? could someone help me? peaseeeeeeee

 

[gunthagunth]

i may be a noob but I am not a noob to forums. start your own thread or search the problem. dont jump into someone elses that has nothing to do with your problem and start posting.

 

[hichman]

you dont have to be a jerk.

 

[gunthagunth]

not trying to be a jerk but it should be common sense that you hit the reply button to reply a question about a completely different matter. if nobody said anything you would just do it again. then your question would find a answer and my thread would get hijacked.

 

[steveeg519]

reply to origanal post looks like you don't have signal bud. quality needs to be 70 % or better check for trees the siteing of dish or maybe bad dsq switch or could be bad connection in wire but deff looks like bad signal to me