Missing channels dppuls pro

[hondagump]

Hello all,
I've read and learned tons in the past month on this site and thank everyone ahead of time for the help in starting from scratch. I have a pansat 2700a w/ dish 500 w/ dpplus twin lnb setup. scanning 119 and 110. Good signal 87% and signal 99% on both. Been getting some channels but missing espns, hbo, usa, disc etc.....after a month of reading I discovered that the dpplus pro twin lnb requires a pre-set channel list (instead of manually changing polarities) from casper's thread...

Tried this w/ new bin v202 last night, used channel master 1.17.00 and channel list from 2700 channel list thread....after I loaded the bin and then the channel list my epg showed all the channels but never got pic or sound....screen displayed bad channel/scrambled??? ended up factory resetting and reloading v202 bin... got some channels but missing the usual.. is there a specific order to this process in order to get all channels?? so close after a month of trying, but I need help, I'm outta ideas(and driving wife nuts)...my settings are as follows and again, thank you

echo 7
LNB type dish-pro
LNB freq 11250
22khz off
Diseqc (1.0) #1
legacy sw none
skew 45
TP 1225 V 20.000
sat scan all

echo 8,10
LNB type dish-pro
LNB freq 11250
22khz off
Diseqc (1.0) #1 (q drops off when i set it to #2)
legacy none
skew 45
TP 1224 v 20
sat scan alll

 

[Beware Beware]

echo 7
LNB type dish-pro
LNB freq 11250
22khz off
Diseqc (1.0) #1
legacy sw none
skew 45
TP 1225 V 20.000
sat scan all

echo 8,10
LNB type dish-pro
LNB freq 11250
22khz off
Diseqc (1.0) #1 (q drops off when i set it to #2)
legacy none
skew 45
TP 1224 v 20
sat scan alll>>>>Maybe you have a bad switch because you can't have two sats on same switch #1 has to be #2 or #3 or #4 can't both be on #1 look in to that Cheers

 

[hondagump]

would you be referring to the internal switch the dpplus pro twin lnb has?? I have no external switches inline from the lnbs to the stb...from my understanding external switches aren't needed b/c of the internal one

 

[ryche87]

Someone correct me if I'm wrong.....I do not belive the internal switch of the DP plus can be controlled with a pansat....At least could not get it to work with a 2700a

 

[hondagump]

ryche87...i was wondering the same thing from a post i read this weekend. For those who might be wiser than me and DO know, will a dp twin lnb (not plus) work w/ a 2700a?? to get the missing channels or is a legacy lnb required? please help