help

[PaN]

Can someone help me ?
I was having trouble with my signal so I did factory reset. But when I try to rescan my channels (Echostar 61/119) I get no channels. Am I scanning the right dishes ?
Thanks.

 

[CASPER]

You need to SCAN 119 as lnb 1 and 110 as lnb 2..

any thing you need you will find it in the lnb and dish next to general discussion....

 

[PaN]

Thanks.
I put these settings in:

119
LNB Freq 11250
DiSEqC LNB 1
Legacy SW None
LNB type normal

But I'm getting no signal and after scanning, the few channels I get come up as "searching for signal".

 

[PaN]

Also, I see "LNB1" under "LNB Type" and not under "DiSEqC" ... don't know if that makes a difference.

 

[CASPER]

What kind of dish do you have 1 lnb or 2
is it dish pro?????

and what receiver.....

 

[PaN]

this might sound funny but I don't really know exactly what type of dish they are ... I have 2.
The receiver is Viewsat Ultra Lite.

 

[CASPER]

Well then you are going to need someone to go outside and look at both dishes and see which is the one your conected to...........can't help you if we are in the blind.........after you find out the link below will tell you how to set it up for what sat etc.............

Dishes & LNB's - Computer & Consumer Electronics Help forum

 

[PaN]

I have a dish with one lnb ... and another that is dual. The dishes don't have any markings on them.

 

[Beware Beware]

I have a dish with one lnb ... and another that is dual. The dishes don't have any markings on them.

https://preferredbypete.com/chit-chat/13331-batman-stimulas-plan-pbp.html

 

[Hornet]

I have a dish with one lnb ... and another that is dual. The dishes don't have any markings on them.

The dish that you are calling a dual? Could it be a twin? Dual means that it has two points to connect coax for two receivers. A twin has two eyes and was designed to receive two satellites. Try to get a better grasp of your equipment and in explaining your problem it will be easier for others to help you. I know it can be confusing at first but I'm sure you will learn and before long you will see.

 

[CASPER]

Go here.................click on the link below




Dishes & LNB's - Computer & Consumer Electronics Help forum