CASPER
New member
How To Properly Load Coolsat 5000Here is a c/p on the proper way to load your cs5k , not my work, thanks goto topcat from another site.
You will need to unzip the Factory binV.100 and the newest current Bin file and save in CoolSat 5000 Folder.
Note the proloader will require the unzipped stb file for it to work
You now have all the tools to load your receiver and are ready to
Continue;
Go to Menu/System settings and write down your settings for each Satellite, Go to Options and record those as well you will need them later.
Loading New File To Coolsat 5000
With the reciever connected to the tv>
Go to menu/system settings/Data base reset/enter 0000/Factory set/press OK/ select Yes/
* Power Off receiver using switch on back of unit & disconnect from TV
* Connect receiver to PC using supplied cable & and plug in AC power cord
* Turn receiver power switch back on.
* Open up Coolsat Pro Loader File
* Hit Auto Detect--Exit
Using browse option, locate and select **Coolsat 5000-100-STB file
**This will load the original factory program to the receiver. You will see new files loading to 100%, and then old files erasing up to 100%.
* When complete, power off the receiver.
* Disconnect the receiver from PC
* Reconnect the receiver to your TV and turn power switch on.
* Using the remote, select System Setting in the main menu, in the submenu select Database Reset, and then Factory Set, Press OK
* When factory set is complete (language option screen appears), power off receiver and disconnect from TV.
* Reconnect receiver to PC and switch power back on
* Open up Coolsat Pro Loader File
* Using browse option, locate and select from your folder the New NorW STB file.
* eg. Coolsat 5000-159-STB Once again, you will see the new files loading to 100% and old files erasing to 100%.
* When complete, power off the Coolsat and disconnect from PC
* Reconnect to TV and switch power back on.
* Using the remote, select Menu --> System Setting --> Database Reset, enter passworld and select Factory Set, Press OK
After you click on save you will be back in Main Screen.
Select language you want
* Now, press Menu --> Installation --> Dish Setting, click Ok, enter password and scroll to your first satellite.You will need to enter your settings (as you wrote them down) for each Satellite LNB type, DiSEqC to 1.0 and commit the correct ports of the DiSEqC switch if you are using one.Press Exit and save.
* Next go to Options, click OK . Reset options as you had written them down.Turn on renumber Bev,if necessary. Go to renumbering local ch, click OK and enter your locale. . Press exit and save.
* Go to Auto Scan; select (example) 91.0W Nimiq 1,3 as the satellite, and then select OK to run the scan. Repeat for each satellite. When done, press Exit and save.Exit to main menu.
* Back in main menu , go to System Setting.Set time settings and security-channel locks. Press exit and save.Once complete, exit from Main Menu.
* Exit until you return to full screen. The screen will say "Scramble Channel" until the keys roll and then your television program will appear.
Watch TV
__________________
Blessed are thee That get it for FREE!
