[Question?] Nano (not Nana 2) "Off Service"

[twitchie]

OK. My Nano has been running fine for the last year. However, I just did a factort reset, loaded the latest factory file, upgrade file, and dongle file. All seemed to go fine. I was able to "register" without a problem. Now I am getting the dreaded "Off Service" message in the bottom right corner.

Any ideas??

 

[BROWNNOSE]

welcome twitchie to the site,, there few post about this problems on the 129 file and you will find this system in other reasever,, so read what we have it may help you


here what a member have done..

C/A paste for a member

(1) After I have read most of the Posts complaining about the New files 8.10 and 1.29, I have decided not to change the files; yesterday (06/28) suddenly my receiver went dark. All Channels were Scrambled . No matter what I did, channels were Scrambled ! Finally I decieded to check the Systems, to my surprise, my system had nothing, no files of any kind!! I tried to download the 8.6 and 1.28 files, receiver kept sending the same message, downlod the New Files!! another word thru the Internet CNX "I think!" advises to the owners downloading the new files!

if that fails then go do this

So, here it is fellows; I did a factory default , then I have down loaded the new boot file "8.10" then the new 1.29 BIN . did the settings ,,,VOILA, my Nano2 is working FINE, no freezing so far and I have aLL THE CHANNELS.

OR DO THIS
(2)Any one having problems,

hope this works and put it back 128,,


here is the thread that was posted with a lot if that might help you..

just cleck it

https://preferredbypete.com/conaxsa...cnx-nano2-please-upgrade-latest-software.html

good luck and let me know how you made out

b hunter

 

[twitchie]

Nope. This is not my Nano (not Nano 2) problem. But(man), thanks anyway.

 

[twitchie]

OK guys. Thanks for your help. I left it on overnight and woke up to TV. Gracias!!!!

 

[BROWNNOSE]

"Great JOB" twitchie, I had faith in you,, I knew you could do it,,


good luck,,

I will now close this Thread problem has been fix

B hunter