Both BEV and D!sh are down with my Pansat 9000HD. BEV comes in for about 2 minutes than craps out with a freeze screen but audio stays. Wait a while, 10 minutes or so and it repeats this action. D!sh is completly gone. Any suggestions. Its been like this for 4 days...in fact the last fix posted did nothing. You assistance will be appreciated.
Need help with Pansat 9000HD
CASPER
New member
At this time there is no support for this model, but you can try this if you like
load up the file again.
First delete the current one.....
Below is a clean bin copy attached from my files.
make sure you have autoroll on when it comes up then make sure
you've left it sitting on a channel example ch 200 for 20 minutes un interupted to let the keys roll if needed?
Always let the key's roll before you change channels,. You must be patient
Best of luck casper.
load up the file again.
First delete the current one.....
Below is a clean bin copy attached from my files.
make sure you have autoroll on when it comes up then make sure
you've left it sitting on a channel example ch 200 for 20 minutes un interupted to let the keys roll if needed?
Always let the key's roll before you change channels,. You must be patient
Best of luck casper.
