OK...............................
1. Checked my LNB's at my friends=Good
2. Excellent sig and quality both sats are in the 90's for both
3. All sat settings are correct with my dish and LNB's
4. Great scan 700 channels between the 2 birds
5. Factory defaulted 3 times/system cleaned 3 times/ re-loaded a new 420 file, from a friend that's working, 3 times all with no satellites connected to the receiver.
6. Reset WM hub to rom 100. Then uploaded successfully in this order 1.4, 1.9, 2.2 with the factory file on the receiver and no sat connected.
7. Re-booted modem, router and receiver in that order with 5 minutes between each.
8. DHCP setting
9. No on Private server
10. Local IP 192.168.1.xxx Port 80
sub net 255.255.255.0
Gateway 192.168.1.1
Server IP 0.0.0.0 Port 9999
Mixed mode
Use DNS (checked)
DNS Server IP 192.168.1.1
Serial 112500
databit 8
Stopbit 1
Inactivity time 8
all other categories blank or 0
11. Ihub pings with successful response 5 out of 5(both of my hubs work at friends house)
12. Upper corner shows 2.2
13. MAC address 90:BC xxxxxx=Good
14. Router shows connection count with hub and lists as dhcp client and active.
15. Re-booted everything after loading like this.
16. Wildblue ISP no ports being blocked that I can see from my router
Got 2 hours of TV yesterday. Then went down, not back since. Loading the 263 file ,YES WITH THE WM HUB, produces a set of numbers in the serial section of the IP. Every time I load that file the numbers change. If I apply nothing ever happens. If I set to all 0's and re-load 420 I get fail to get serial from server........It does go away after 10 minutes, but no tv. Roll back to the 263 file...........new numbers. Something is up with my connection to the server as far as I can tell..........How to resolve this? I HAVE NO FRICKIN CLUE!!! Both hubs, both 360P's Exact same problem. HELP
1. Checked my LNB's at my friends=Good
2. Excellent sig and quality both sats are in the 90's for both
3. All sat settings are correct with my dish and LNB's
4. Great scan 700 channels between the 2 birds
5. Factory defaulted 3 times/system cleaned 3 times/ re-loaded a new 420 file, from a friend that's working, 3 times all with no satellites connected to the receiver.
6. Reset WM hub to rom 100. Then uploaded successfully in this order 1.4, 1.9, 2.2 with the factory file on the receiver and no sat connected.
7. Re-booted modem, router and receiver in that order with 5 minutes between each.
8. DHCP setting
9. No on Private server
10. Local IP 192.168.1.xxx Port 80
sub net 255.255.255.0
Gateway 192.168.1.1
Server IP 0.0.0.0 Port 9999
Mixed mode
Use DNS (checked)
DNS Server IP 192.168.1.1
Serial 112500
databit 8
Stopbit 1
Inactivity time 8
all other categories blank or 0
11. Ihub pings with successful response 5 out of 5(both of my hubs work at friends house)
12. Upper corner shows 2.2
13. MAC address 90:BC xxxxxx=Good
14. Router shows connection count with hub and lists as dhcp client and active.
15. Re-booted everything after loading like this.
16. Wildblue ISP no ports being blocked that I can see from my router
Got 2 hours of TV yesterday. Then went down, not back since. Loading the 263 file ,YES WITH THE WM HUB, produces a set of numbers in the serial section of the IP. Every time I load that file the numbers change. If I apply nothing ever happens. If I set to all 0's and re-load 420 I get fail to get serial from server........It does go away after 10 minutes, but no tv. Roll back to the 263 file...........new numbers. Something is up with my connection to the server as far as I can tell..........How to resolve this? I HAVE NO FRICKIN CLUE!!! Both hubs, both 360P's Exact same problem. HELP
