[Confused!] problem with channels on Echo 7.

I have dish pro twin LNB and I have problem with channels on Echo 7. If I am watching any channel on Echo 7 then it shows up and then get scrambled and then becomes clear again when I switch to other channel and then switch back. I also have channels on Echo 8,10 and they are all OK all the time.. I have following settings in FLU.

Echo7K:
=======
LNB Type = Dishpro
LNB Local-Freq. = 11250
22KHz = Off
DiSEqC = (1.0) #1
legacy SW = None
Skew = -45
TP = 12486 v 20.000
Positioner Setting = disabled
Scan = All

Echo8,10K:
=======
LNB Type = Dishpro
LNB Local-Freq. = 11250
22KHz = Off
DiSEqC = (1.0) #2
legacy SW = None
Skew = +45
TP = 12486 v 20.000
Positioner Setting = disabled
Scan = All

Please let me know if I miss anything....Thx
 
I am not sure but i have been having the same problem on my CNX mini and it can get frusrating.somebody should be along soon to help figure it out untill then.......
 
Back
Top