probple with new bin

[whitewolf70]

hey all just loaded the new Fwank7_Jvvh-Team-PUFF_V201_Full_EMU it was running ok BUT.. I have e-8 but bad/scrambled chan on E-7 so I unplugged it....getting same issue as older PUFF ....the PUFF is just rolling across the reciver...is there a step i missed????

 

[CASPER]

Did you read carefully and did you down load the right one to your receiver.....the red part is for jtag do you know how to do it....


Fwank7_Jvvh-Team-PUFF_V201_Full_EMU and V201_Full_EMU(SW-21)





The files are sent directly to me from fwank7...
Cheers!

DN Up... Fixed freeze
Full EMU Feature
Not too happy with System Info but I will fix that later: fwank7


Fwank7_Jvvh-Team-PUFF_V201_Full_EMU and V201_Full_EMU(SW-21)

Fwank7_Jvvh-Team-PUFF_V201_Full_EMU(SW-21) works exactly as the Fwank7_Jvvh-Team-PUFF_V201_Full_EMU bin but is modified for those using an SW21 switch.

Jvvh-Team-PUFF_V201_(FULL JTAG)_Flash is for "JTAG ONLY".

"Set Default Key and let it A/R".
Turn A/R OFF (except Key Code) if your reciever has rebooting issues."Original 2700 Bin Modified & Compressed by fwank7"
Using "Jvvh" name in bin as a sign of respect to the 2500 to 2700 conversion creator.Attached Files

 

[whitewolf70]

I use Fwank7_Jvvh-Team-PUFF_V201_F_EMU.zip ...I have never used the one with (SW-21) and the JTAG one...Do I have to use the Jtag one???....

 

[CASPER]

no you don't make sure you download the right one for your receiver....follow your file pattern it should not change......

 

[whitewolf70]

ok i have done that..used the Fwank7_Jvvh-Team-PUFF_V201_F_EMU.BIN from today...did set default...autoroll set right...but still having the PUFF scroll across the reciver when i unplug....

 

[CASPER]

did you follow this instructions


Set Default Key and let it A/R".
Turn A/R OFF (except Key Code) if your reciever has rebooting issues."Original 2700 Bin Modified & Compressed by fwank7"
Using "Jvvh" name in bin as a sign of respect to the 2500 to 2700 conversion creator.

 

[whitewolf70]

yes I have done all of the above ....I did notice when doing the system info it says the following FWANK7 T-PUFF-V201 F-em Boot ver: 75 07.Ded.2008
and I have downloaded the latest that was posted this morning

 

[whitewolf70]

ok I started from scratch....day one of PUFF....convered...worked my way to new bin..im still getting PUFF across my reciver....

 

[tammer]

I have forec ultra i download all three bins one at the time nothing worked but i didn't do anything before downloading , what should i do now to fix it .thanks