249T_Light_100t_series_ serial bin 2500 to 2700 (B3V Only)

[soubi]

FIRST AFTER LOADING BIN DO A FACTORY RESET SCAN B3V AND BEFORE SCANNING D/N DO A REBOOT SWITCH IN BACK OFF/ON

FIXES B3V only

THIS IS FOR PEOPLE THAT BEEN CONVERT TO 2700, AND DO A FACTORY RESET TO GET ALL SATS

NOTE: AFTER LOADING BIN DO A FACTORY RESET BEFORE YOU SCAN AND SCAN BEV FIRST A SET-UP DO A HARD REBOOT

SWITCH IN BACK OFF/ON

Thanks go to Chancysand for CS_249T_Lightning_100t_Series_serial


NOTE: AUTOROLL OFF AND STILL A/R KEYS - B3V

ALSO: SAVE YOUR CHANNEL LIST BEFORE YOU LOAD ANY NEW BIN WITH CHANNEL MASTER & THEN LOAD TO STB AFTER YOU

AFTER YOU LOADED NEW BIN< USE PANSAT_2700 AS YOUR STB WITH CHANNEL MASTER

I tested the new CS_249T_Light bin with chancysand and he came through again Thanks Chancysand

NOTE: after loading 249T serial bin and if you get scramble hit 8282 on remote and do a set key default