[Help!] CW 800 in boot

[patricia]

i have a cw800 display boot but i install the factory bin 1.03 with the loader version 1.03 and nothing, don`t star....is thinking and the word boot no chance, don`t do enything, no aceept the factory bin ......what can i do to put it the new bin.

 

[CASPER]

the cw800 are only working for true FTA and or IKS card sharing threw private server.....

 

[patricia]

Yes i have the doongle

 

[CASPER]

ok then you need to load it via USB

But first how old is your CW800 the old one's use the 102 factory and the new one's use the 103.????

PS there is also a CW800S_USB+Boot+Loader_V1.04.zip for the out of the box Receivers...

https://preferredbypete.com/800s-files/11815-cw800s_usb-boot-loader_v1-04-zip.html

 

[patricia]

I don´t know if the cw is old....i bougth sice two year ago.....if i have the 1.02 factory...which is the second step to put it with usb...

 

[CASPER]

In order to see the replies quickly u must refresh the page or hit F5 on your key board do that I'm only going to be here for another 10 Minutes...

 

[CASPER]

ok if you have the 102 u have to make sure you load the version 2.29 with the data patch this will ask you for your reciever information twice then it will never ask you again load the v2.29 and then load the 2.49

https://preferredbypete.com/800s-files/15250-how-install-v2-29-cw700s-cw800s.html

https://preferredbypete.com/800s-files/18034-cw800sv2-49_2010_01_22_dongle-only.html

 

[patricia]

The problem is that I load all file.....I open the firmware v1.03......and choose the file data pach....when push star....don´t happen nothing....follow in display BOOT....like the cw is dead...

 

[patricia]

i`m using the cable null and the convert USB serial..because the end of the cable my computer don`t have it...do you thing the problem is the cable???

 

[CASPER]

yes it need to be straight connection, you can also use a usb removable drive copy and past all extract or open file's on to it and then click on usb in your remote then load one by one that should do the trick.

 

[patricia]

negative......i check very well the connexions....all is ok.....the reciever no chance the display " BOOT" .....right now push the botton power rare and front togehteh, all the way...and nothing....always " BOOT".....Do you thing the receiver is dead or don´t work anymore...Do you have i need have to throw it out...jajajajja...I am driving.

 

[CASPER]

Since we are not on at the same time here is something I put together few how to step's for getting receiver out of Boot mode......here is the link

https://preferredbypete.com/800s-files/19057-cw-800-unit-stuck-display-showing.html

Best of Luck .......