How to Connect an NFusion Solaris Receiver to a computer using the ethernet port

[marvinrzgibson]

I have an NFusion Solaris Receiver. I want to know if I can connect to my NFusion Receiver to my laptop using the ethernet port. If not, can I connect to my Receiver to my laptop at all? And if so, what kind of connection should I use to do this? I will be grateful for a response here or in my email box - . Thanks!

 

[CASPER]

for your security I edited your post and took your email out you do not want any other 3rd parties sending you junk...your post will be answer here just keep checking .....here are links so that you can help your self out...everything you ask for is here all you need to do is use search key to find things...


https://preferredbypete.com/other-r...is-receiver-computer-using-ethernet-port.html

https://preferredbypete.com/other-receivers/15652-set-up-guide-nuvenio-sd-solaris.html


https://preferredbypete.com/other-receivers/15937-ippvr-nfusion-solaris-how.html

https://preferredbypete.com/other-receivers/15631-re-nfusion-solaris-b3v-setup.html

 

[BROWNNOSE]

you can use a(cross over eithernet wire) from your laptop to your box .

how to make a cross over eithernet wire.

pc straightthru hub __________ pc crossover wire
----pins-------------------------pins
tx+1-------1 RX+ _______ TX +1 ---to----3 RX+
TX-2-------2 RX-_________TX-2----to----6 RX-
RX+3-------3 TX+________RX+3----to----1 TX+
.....4-------4 _______________4----------4
.....5-------5 ______________ 5-----------5
RX-6-------6TX-_________RX-6----to-----2 TX-
.....7-------7______________ 7-----------7
.....8-------8_______________8-----------8

hope this will help you make a cross over wire if you need any help to set up just reply to this post


lit bill

 

[coyote360]

hi
if you want to connect directly on you laptop you will need a cross-link ethernet cable .. if you connect to router straight cable like " CAT.5E "

hope it will help