Nano Premiun With DirecTV SlimLine HD Dish
- Thread starter olimpia63
- Start date
eloans1
New member
That dish should work fine, go to this website to see what direction to point your dish.
Follow these instructions..
The Nano Premium uses the same process as the Nano2 for loading.
Loading Bins
1) Copy Extracted Bins Factory NPP_9.05_Factory.NPP and Factory bin NPP_9.06_Factory.NPP and also SKY_1.01.NPP onto the USB Stick.
2) Insert USB Stick into front USB Port.
3) Go to Menu, Utility, USB and chose BIN to load.
4) Load Factory 9.05_Factory.NPP when done load _9.06_Factory.NPP
5) Then load SKY_1.01.NPP
6) Set up Satellites.
7) Scan sats.
8) Confirm CH 101 is up.
Network
1) Menu, Installation, Network
2) Click on IP Set Up
3) Then Networking Setting
lace to "Auto"
4) Click Apply
5) Wait for ISP to fill in
6) Exit then leave network settings on NANO stream ...should be up !!
Code:
www.dishpointer.comFollow these instructions..
The Nano Premium uses the same process as the Nano2 for loading.
Loading Bins
1) Copy Extracted Bins Factory NPP_9.05_Factory.NPP and Factory bin NPP_9.06_Factory.NPP and also SKY_1.01.NPP onto the USB Stick.
2) Insert USB Stick into front USB Port.
3) Go to Menu, Utility, USB and chose BIN to load.
4) Load Factory 9.05_Factory.NPP when done load _9.06_Factory.NPP
5) Then load SKY_1.01.NPP
6) Set up Satellites.
7) Scan sats.
8) Confirm CH 101 is up.
Network
1) Menu, Installation, Network
2) Click on IP Set Up
3) Then Networking Setting
lace to "Auto"4) Click Apply
5) Wait for ISP to fill in
6) Exit then leave network settings on NANO stream ...should be up !!
