Need help to get channels!

[nazmul007]

GUYS,
I don't know anything about dn setup or fix. I had a guy set up dn in my house. It was viewsat ultra lite. I get pretty much all the channels like hbo, cinemax etc.. He also put a separate dish "FORTECH STAR" for asian channels.But this dish is not hook up with with any cables another way not connected with the box. I think it's not in right direction either. I can't get hold of that guy any more.
My question is, how can I hook up this dish with viewsat ultra lite and watch asian channels? Like I said, I didn't know anything about how to set up or I don't have any tools either.
I would appreciate your help.
Thanks

 

[CASPER]

everything you need to know is here all you have to do is read a lot and learn on your own just like everyone else.. click on the links below that can help you on your way to learning....


https://preferredbypete.com/ultra-lite/11389-viewsat-dummies-volume-2-how-set-up-viewsat.html

https://preferredbypete.com/ultra-lite/11388-viewsat-vs-ultra-lite-setup-guide.html


https://preferredbypete.com/ultra-lite/7358-factory-firmware-viewsat_ultralite_v0107-9-2-2008-a.html


https://preferredbypete.com/ultra-lite/4370-vs-ultra-lite-factory-bin-file-v0102.html


https://preferredbypete.com/ultra-lite/4369-channel-edit-loader-ultralite_loader-zip.html




https://preferredbypete.com/dishes-...nstalled-grandpooba-revised-2007-11-06-a.html

https://preferredbypete.com/dishes-lnbs/11985-antenna-settings.html


https://preferredbypete.com/dishes-lnbs/11806-different-way-mount-d-sh.html

https://preferredbypete.com/dishes-lnbs/11804-two-sites-shows-where-point-dishes.html


https://preferredbypete.com/dishes-lnbs/11801-what-d-sh-does-what.html

 

[nazmul007]

thanks for all the info.
i connected the other dish (for asian channels) to the box and i get signals around 68 to 74. but no quality at all. i even take out the dish from the mount and moved right toi left, no luck at all. i didn't see any movement on the quality.
what am i doing wrong?

 

[CASPER]

Well everything you need is there make sure you read it very carefully again and re do it....that has happen to some of us tha missed a step on the set up....

 

[nazmul007]

thanks, i will start over.

 

[CASPER]

after you start all over make sure you use the new fixe that was posted last night look for 030309 files......