[Confused!] Need help with pansat 3500 and dishpro dual lnb

[chiltonpr]

I just install my dish with dishpro dual lnb and a pansat 3500 receiver

Im not using any switch. I ran a cable from the lnbs straight to the receiver
settings

echo 7
LNB type dish-pro
LNB freq 11250
22khz off
Diseqc (1.0) #1
legacy sw none
skew 45
TP 1225 V 20.000
sat scan all

echo 8,10
LNB type dish-pro
LNB freq 11250
22khz off
Diseqc (1.0) #1 (q drops off when i set it to #2)
legacy none
skew 45
TP 1224 v 20
sat scan alll

I did a blind scan just for the 119 (I turned off the 110) and I have a lot of missing channels like Discovery espn and ect....

I also tried to load an old channel list with all channels. In my epg I see the discovery channel (for example) but can not see anything, but others channels are ok.

I wrote down the tp number I went to tp scan and I see the TP with signal lock and 90 % quality and still wont get picture...

Can some one give me a hint

I used this pansat back in my home town with 2 standars lnbs and every works fine.

 

[chiltonpr]

so there is more person with thhis same issue that I have ??

 

[CASPER]

Channels are being move to N3


soon we will be down on all dn for about 2 to 4 months with no tv

this gives you some heads up on things that are happenning as we speak....