Hello. I just had the Dish Network installer come and set me up with a new Dish 500+ and the 3 LNBs to view english and asian channels. They have also installed a DP34 switch.
I just updated my Pansat 2700a with the v211 bin and want to setup my satellites.
I need to know the following to setup my files:
Anik F3/Ku
-----------
LNB Type: Standard
LNB Local-Freq.: 10750
22kHz: Off
DiSEqC: Off
Legacy SW: None
Skew: ???
TP: ???
Positioner Setting: Disable
Satellite Scan: All
I previously had the Dish 500 and had my Echo 8.10/ku settings and it worked. I also cannot deselect the Echo 8.10/ku from my Satellite list on the left.
I also need the settings for the english channels: what satellite to use and the settings listed above (skew, tp, etc.).
Please help me setup all my satellites. Thank you very much
I just updated my Pansat 2700a with the v211 bin and want to setup my satellites.
I need to know the following to setup my files:
Anik F3/Ku
-----------
LNB Type: Standard
LNB Local-Freq.: 10750
22kHz: Off
DiSEqC: Off
Legacy SW: None
Skew: ???
TP: ???
Positioner Setting: Disable
Satellite Scan: All
I previously had the Dish 500 and had my Echo 8.10/ku settings and it worked. I also cannot deselect the Echo 8.10/ku from my Satellite list on the left.
I also need the settings for the english channels: what satellite to use and the settings listed above (skew, tp, etc.).
Please help me setup all my satellites. Thank you very much
