sv 360 p is up or down ???

[mahnaz1023]

SV360 premier is down or up ???

 

[valerena]

Mine is down too. Ever since I upgraded to 2.2. with the ihub and version 419. I don't see my serial number anymore listed in the IP Config screen. Now there is a slot for a username and password and DES Key. I no longer see my serial number listed on the screen.

 

[BROWNNOSE]

Hey mannaz1023 there are no reports anywhere I see of that sv360 was down try to reboot your box by the switch on the back, if that don't work then check the internet connection you may have to reboot that as well..

good luck

b hunter

 

[lynomy]

360p up with 419 bin and 2.2 ihub, STATIC, 8.8.8.8

 

[d_mclaughlin30]

What is 8.8.8

 

[BROWNNOSE]

OK mahnaz1023
I mayself not into testing your system but have a good idea of what going on with it,, so bare with me and hope I can get you going, or We have one of the best membership on the net today, maybe a few of our members will jump in and help us out, bare with them too they do get a little "shy",,

here a few idea that might help you

(1) IDEA<< put the namec of server input fenfu.dynsite.net Click on Menu>Ipconfig>Change Private Server No to YES.
5. In USE DNS - Change to yes
6. Chage Port to 10210
7.input fenfu.dynsite.com
8. In USER NAME click OK and a KEYBOARD will appear.
Type the Code -
9. In PASSWORD - type your acces code again

(2) IDEA<< your going to like this How to link below it has all the info
Just use the up-dated file when testing

Enjoy https://preferredbypete.com/sonicview-discussions/23138-sv-360-premier-how.html


good luck
b hunter

 

[lynomy]

What is 8.8.8

DNS IP 8.8.8.8
360p Still up!!!!

 

[BROWNNOSE]

What is 8.8.8

lynomy thanks;

I'm with "d_mc" what is 8.8.8.8 if you could please post that info for the members would right on time,,

sorry I just seen after I made this post,,

thanks bud
b hunter

 

[valerena]

what is the code we are supposed to type in?

 

[valerena]

Can someone also tell me what key codes they are using. I have to input mine again since I did factory reset.

 

[lynomy]

Can someone also tell me what key codes they are using. I have to input mine again since I did factory reset.

419 bin file and ihub 2.2

 

[valerena]

I loaded bin 419 and ihub 2.2 version. But I need to input the key codes again using the remote control because I did factory reset and the all the key codes got erased.

 

[BROWNNOSE]

I loaded bin 419 and ihub 2.2 version. But I need to input the key codes again using the remote control because I did factory reset and the all the key codes got erased.

hey valerena in this link I beleive you will find all the codes you need..

https://preferredbypete.com/sonicview-discussions/23138-sv-360-premier-how.html


Big thanks "lynomy" for sticking with valerena and helping him,,
YOUR THE MAN!!!

hunter

 

[valerena]

I am still wondering if this is how I am supposed to enter the keycodes?

7. Enter the first half of Key 86 (Key 00) in line 10.
8. Then enter the second half of Key 86 (Key 01) in line 11.
9. Then Enter the first half of Key 96 (Key 01) in line 20.
10. Then Enter the second half of Key 96 (Key 01) in line 21.

Do we have to do this anymore since we are using the ihub? thank you for your help

 

[BROWNNOSE]

HMM good question, lets see if we can get somebody to ansure that,, remember I found this a little while back it's not too old,,

and not to high jack this thread but your right on all those sites going out,,

(quote valerena)
I would love to pay but I am wondering if this website will get shut down like all the others?

we have a great manager and CEO here your welcome PM him anytime he will be please to meet you his name is
"Rumas" you will know this man is very trusting person,

thank you for bring this up
B hunter

 

[lynomy]

I am still wondering if this is how I am supposed to enter the keycodes?

7. Enter the first half of Key 86 (Key 00) in line 10.
8. Then enter the second half of Key 86 (Key 01) in line 11.
9. Then Enter the first half of Key 96 (Key 01) in line 20.
10. Then Enter the second half of Key 96 (Key 01) in line 21.

Do we have to do this anymore since we are using the ihub? thank you for your help

I don't now what you mean with keycodes...I believe that with ihub you don't have to put them...be sure that you have the correct address in domain name in WIZNET it is svftaiks.com with www at the begining

 

[BROWNNOSE]

opps,, I forgot to put the domain name in there sorry guys..

thanks lynom