Hi I can't load the V1.2 to my newlink mark an error when I'm loading with the USB, can somebody help?
And when I load de newlik file says ADAPTER OLD, theres something that I can do to fix it?
The newlink version is 1.1
Thanks
1- I know this is a damn question but I got to ask away,, are you opening the zip files and exstracking them, and then copy the file onto the usb stick you would not beleive how many people don't don't do that..
2- you must load the newest files,, befor you do that write down your LNB and sat up system you have, this makes things easy,,
3- you might have to reload your files a few times here a how to set up take your time 1 step at a time,,
4- here an older type set up just remember to use the new files with it,,
how to recover HD8000 from "power on" locked status
If your sv HD8000 does not fully boot up,but boots to the front display message: power on.you can recover from this quite easily.
tools:
1.loader
2.factory file
steps:
extract both the Loader and the Factory file from their compressed folders and place them on your desktop or your sv folder.
1.leave or turn your receiver off from the rear switch and connect the null serial cable that was shipped with your receiver,to your pc.
2.open the loader,and select the STB tab.then press connect.select your com port.
3.select STB tab again,and then select download file (pc>stb).
4.select the factory file.i used version: HD8000_FACTORY_0101.rom
since this particular file is a .rom you need to select "all files" at the bottom of your pc's browser window pop up.
5.once you pressed ok to select the file,the loaders pop up window appears showing the status.turn the rear switch of your receiver on to begin the download.
once complete,wait for the receiver to fully boot up.and your now back to square one and can now exit the loader.turn the rear switch off.take Unit back to your tv,upload the latest file via usb stick.setup and scan.
enjoy.
by the way I deleted that other thread you posted,, I see where you mess up and reposted the same problem where you ment to put this post in the SV 8000 No need you where just fine the 1st. time,,
I got you cover buddy,,
B hunter
