im kinda fresh at this also. first, you must use only 2700a files. the latest bin is bin 261. it came out around 11. last night. first, i would do a factory reset. then load the latest bin. let it finish dl before you interrrupt. once its complete, turn power off at the back. connect to your tv. once you have it connected. go to menu, intallation,antenna setup, once you are in antenna setup, select the sat which you are pointing to.select the lnb type that you are using, turn the diseqc switch to the one you have your swiched selected at. example sat 110 is in the diseqc position 1. then do the same with the other sat. (they will have differ numbers. it should be between 1-4.) after that exit out go to blind scan select the first sat, to be scanned example echo 7. go to the bottom of the page and select scan all, then hit ok, let it do its thing, then do the same with the other sat, once you did both sat, exit and enjoy. i think i covered everyhting, if someone think i left out something, please jump in. i had alot of help on here, so im trying to pass the savings on to someone else, this is my way of giving back to the community.
