scuggers1

New member
I was forced to power off the unit from the back in the middle of a bin installation. [where it says caution: do not power off]

reason is the install stuck and stopped.

now I have four green dashed lights that are not moving when powered on - what can I do to restore function?

Thanks

:sad:
 
EASY TO FIX use Loader 2 & current BIN...

I was forced to power off the unit from the back in the middle of a bin installation. [where it says caution: do not power off]

reason is the install stuck and stopped.

now I have four green dashed lights that are not moving when powered on - what can I do to restore function?

Thanks

:sad:
No big deal just use loader hook it up to you computer & load the newest Bin & BOB'S YOUR UNCLE .... that means your up & running & it will happen sometimes it has to me . very easy to fix so use loader #2 & current Bin .....CHEERS
 
I think I am having that same problem unfortunatley I do not have the cable to hook it to my PC. Is there another option?
 
is it just frozen turn off & on from back if it has ---- on the front on box the box came with a cable to hook up to your computer
 
THANKS TO CASPER 7 For this Info--------------------------------------------------------------------------------

Try this


Viewsat 2000 Ultra Setup Guide Using Serial Cable (NULL)/USB

A. Loading your BIN using Null cable:

 Connect serial cable (NULL) to PC>STB
 Open up Loader of choice (PVR-Loader 1.1 or Loader2)
 Click on Tool>Configuration>Com port (Default is com 1)
 Click on Open File
 Click on PC>STB (Notice the progression bar in loader)
 Turn the power in the back ON
 Wait for Loader say Completed. Then on box LCD front panel screen say I.N.S.T>END>0000 or until clock count to 0.001
IT IS VERRY IMPORTANT. DO NOT TURN THE POWER OFF TO SOON
 Turn the power OFF in front and power OFF in back
 After downloading the “BIN”, unhook NULL cable from PC>STB
 Connect all the cables to your box/TV
 Turn the power ON in the front and back
 Press Menu key
 Select Installation and press OK
 Select Antenna Setup and press OK
 Select your Sat.
 Here if you have a DISEqC switch enter the port #, Motor or Legacy SW
 No LNB Type need to select (from new, you have only two selection Standard and Universal). STB will select your LNB Automatic
 Press Exit and select Yes for saving the settings
 Your back to Antenna Setup screen
 Here you have Three choices:
1. Channel Scan
2. Auto Scan
3. Blind Scan
 Select Auto Scan
 Press OK
 You are in the Auto Scan window and you see the Bird(Sat.) you selected and on the top of your screen are three options:
1. Search option
2. Network search
3. Scan Start
 You don’t change nothing here, go down and select Scan Start and press OK
 You do this for all the Birds (Sat.) you have
 Wait for Autoroll and watch TV


B. Loading your BIN using USB Jump Drive

 Connect all the cables to your box/TV
 Turn the power ON from the front and back switch
 Press Menu key
 Select Installation and press OK
 Select Antenna Setup and press OK
 Select your Sat.
 Here if you have a DISEqC switch enter the port #, Motor or Legacy SW
 No LNB Type need to select (from new, you have only two selection Standard and Universal). STB will select your LNB Automatic
 Press Exit and select Yes for saving the settings
 Your back to Antenna Setup screen
 Here you have Three choices:
1. Channel Scan
2. Auto Scan
3. Blind Scan
 Select Auto Scan
 Press OK
 You are in the Auto Scan window and you see the Bird(Sat.) you selected and on the top of your screen are three options:
1. Search option
2. Network search
3. Scan Start
 You don’t change nothing, go down and select Scan Start and press OK
 You do this for all the Birds (Sat.) you have
 Now its time to download your BIN ( Newest bins here Computer & Consumer Electronics Help forum - Ask Questions Get Answers Find Reviews!
 Insert the Memory Stick in your PC and transfer the bin in. Than insert in your STB and in the Main Menu select System information and press OK
 Select Receiver Upgrade and press OK
 Go down to the bottom of the window, select USB and press OK
 A new window opens with some Korean files, years, etc.
 In the bottom of the window, it is your bin selects and presses OK
VERY IMPORTANT. DO NOT TURN THE POWER OFF
 After you load the bin, the STB will reboot automatic
 Wait for Autoroll and watch TV
__________________
 
Last edited:
Yes I am so ready for that part. Problem is I can't get more than a black screen and the display starts ----- then switches to 4 up-side-down F's. Should I just run one cables of the 4 that come from my DISH 500 to the receiver without the Disecq1.2 thing? I am at a total loss and I am sure it's something simple....Any ideas? I don't have the cable but using the usb would be no problem if I could get a menu screen.
 
first you need to align your dish make sure you get all obstacles clear from dish tree brush etc....I will post all you need on your profile check for notification no need to post all over the forums to give you the answer's ................
 
Thanks man and I am sorry about all the posts. I'm just like a kid w/ a new toy. I'm going to get the ladder know. I did turn the dish to a very clear area. I still have a Direct TV dish can it still be used with that Diseqc 1.2 thing. Well, we will worry about that l8ter.
Thanks again Super Moderator!
Jason
 
Back
Top