[Confused!] Conaxsat cnx system hook up

[ctwells]

I purchased a conaxsat CNX/DUO rec,used , hooked it up to my dish signal, via Disque sw, loaded the factory LDR file,the x00 DNG file via USB divice and did a channel serch and all I get is Sig scrambled? What am I doing wrong?

 

[SETWIRE]

I purchased a conaxsat CNX/DUO rec,used , hooked it up to my dish signal, via Disque sw, loaded the factory LDR file,the x00 DNG file via USB divice and did a channel serch and all I get is Sig scrambled? What am I doing wrong?

Well you never mentioned which 3rd party bin file you loaded-----You won't get provider TV without a 3rd party bin file loaded -------and you never mentioned what dongle you are using, -----IX-200 or IX-400.

If you don't have the latest Bin file loaded and you are not using one of the 2 Dongles then you certainly won't be watching any provider TV.

 

[BROWNNOSE]

Well you never mentioned which 3rd party bin file you loaded-----You won't get provider TV without a 3rd party bin file loaded -------and you never mentioned what dongle you are using, -----IX-200 or IX-400.

If you don't have the latest Bin file loaded and you are not using one of the 2 Dongles then you certainly won't be watching any provider TV.

Welcome "ctwells" to PreferredByPete.com I hope you Enjoy the help forums and we could get you up and going...

Now Let get you started,, "setwire" right,,
We need more info from you to get set up, we have a large selection of (how too!) for your system,,
we have no doubt your system will be working in no time with the help of the members pointing the way for you,,

 

[SETWIRE]

Welcome "ctwells" to PreferredByPete.com I hope you Enjoy the help forums and we could get you up and going...

Now Let get you started,, "setwire" right,,
We need more info from you to get set up, we have a large selection of (how too!) for your system,,
we have no doubt your system will be working in no time with the help of the members pointing the way for you,,

Well lets not get him too excited----CNX's are presently down.LOL

 

[BROWNNOSE]

Well lets not get him too excited----CNX's are presently down.LOL

LOL!! the real excited thing with my posted message,, if you could read between the lines we have a pro trying to help "ctwells" out and doing it in the right way,,
Thank You "setwire" for helping the members,,

 

[ctwells]

Well you never mentioned which 3rd party bin file you loaded-----You won't get provider TV without a 3rd party bin file loaded -------and you never mentioned what dongle you are using, -----IX-200 or IX-400.

If you don't have the latest Bin file loaded and you are not using one of the 2 Dongles then you certainly won't be watching any provider TV.

Im not sure, I think IX-200 File names, IX-X00-F_A2.0.3_T1444.DNG &
IX-X00-E-A2.0.6_T1927 (ve seen so many Im not sure what is current.
Im using dish pro 500 twin Lnb. They removed the DP-34 Sw and only hooked up one (1) cable? TV says Im receiving 110 and 119? Dish is working fine.
Thank you for replying

 

[SETWIRE]

Im not sure, I think IX-200 File names, IX-X00-F_A2.0.3_T1444.DNG &
IX-X00-E-A2.0.6_T1927 (ve seen so many Im not sure what is current.
Im using dish pro 500 twin Lnb. They removed the DP-34 Sw and only hooked up one (1) cable? TV says Im receiving 110 and 119? Dish is working fine.
Thank you for replying

What Dongle are you using need to be established.????

What bin file have you got loaded.?

Different Dongle Files for CNX

.DGL File = IX-200 Dongle.

.DNG File = IX-400 Dongle.

 

[BROWNNOSE]

On your dish500,,
It look like they set you up with a DDP Twin dish or something in that order,, if that the case your LNB's are built into the beams and you would have only 1 cable comming out and going stright to the reciever,,

 

[ctwells]

OK, here is what I have: Conaxsat CNX-Duo, System info, sw:mv05.16 (feb-06) LDR 1.08, HW ver:1.00 USB 2.0 driver 1.00,DUO/TRIO (4). Dish Network pro-500Plus(only using 1 cable) mounted on top of house in MN (temp -2w/10"snow) downloaded and unziped to usb stick (IX-X00-F_A2.0.3_T1444.DNG) (IX-X00-EA2.0.6_T1927.DGL)
(DTP_5.16_factory.LDR) (DTP_5.16_factory.UPB). When I plug the stick into the box all files are listed on screen under USB Utility, however when I remove the stick they all go away, even when I save them? Iam not using a DONGLE, should I be? Is the BIN file the Factory file? As you can tell, I am very new to this and need step by step instructions untill I get going. Thank You

 

[Scammer]

yes you need a dongle and internet connection to get it working.

 

[ctwells]

I have a Null Modem Cable to connect to the RS-232 port, is that a dongle?

 

[Scammer]

no a dongle has plug on it for a internet cable to plug in and then the dongle plugs into serial port on back of CNX.

 

[ctwells]

Do all FTA receivers require a DONGLE to make them work? and if not, which brand name would you suggest.

 

[eloans1]

Unless you are using them for true FTA, the answer is yes, you would have to have a dongle or built in connection to connect to the internet to view DN or B3V....

 

[ctwells]

does it need to stay connected at all times or only when programing? and could this be done wireless?

 

[Scammer]

yes you need to be constantly hooked to internet, and it runs fine wireless or on a bridge, even dial-up will work.