[Problem!] not getting ppv
CASPER
New member
I think you have a pansat but which one...
Tips to remember when asking for help in the forums:
When asking a question,you should follow these minimum requirements
1.What Satellites you are aiming at.
2.Your Receiver Brand/Model
3.What version of software you have loaded on it,
("the latest version" is NOT an acceptable answer)
4.What dish and lnb type you have.
("a plain lnb" is not a proper answer)
5.Any switches you have inline. (name the brand/type)
6.What settings you currently have setup.
7.What you have tried so far(Detailed steps)
8.Other things pertinent to your specific question
may also be needed and included.
To post a reply you must follow these guidelines
1. Your answer must be pertinent to the originators question.
(do not answer a question posted by someone else in this thread,(dont reply to hijacker)
2.No bashing the member or question. (we were all newbies at one time)
3.Do not reply to a hijackers question.
4.Post no files in discussion area.You may post a link to a file you
upload in the proper files section.
A properly stated question would look something like this.
I am running a Viewsat Extreme with version 070522x software loaded.
I have a dish500 with a twin Dp lnb.
I have 119 set on diseqc port1 with LNB selected as OCS-DP
and 110 on port2 again OCS-DP selected.
no other switches inline.
My question is,why cant I get 91 when i select it from the list?
Following this template will greatly increase the chances of a solution!
Tips to remember when asking for help in the forums:
When asking a question,you should follow these minimum requirements
1.What Satellites you are aiming at.
2.Your Receiver Brand/Model
3.What version of software you have loaded on it,
("the latest version" is NOT an acceptable answer)
4.What dish and lnb type you have.
("a plain lnb" is not a proper answer)
5.Any switches you have inline. (name the brand/type)
6.What settings you currently have setup.
7.What you have tried so far(Detailed steps)
8.Other things pertinent to your specific question
may also be needed and included.
To post a reply you must follow these guidelines
1. Your answer must be pertinent to the originators question.
(do not answer a question posted by someone else in this thread,(dont reply to hijacker)
2.No bashing the member or question. (we were all newbies at one time)
3.Do not reply to a hijackers question.
4.Post no files in discussion area.You may post a link to a file you
upload in the proper files section.
A properly stated question would look something like this.
I am running a Viewsat Extreme with version 070522x software loaded.
I have a dish500 with a twin Dp lnb.
I have 119 set on diseqc port1 with LNB selected as OCS-DP
and 110 on port2 again OCS-DP selected.
no other switches inline.
My question is,why cant I get 91 when i select it from the list?
Following this template will greatly increase the chances of a solution!
I am running a pansat 2700 with version b75 software loaded.
I have a dish500 with a twin Dp lnb.
I have 119 set on diseqc port1 with LNB selected as OCS-DP
and 110 on port2 again OCS-DP selected.
no other switches inline.
My question is, im am missing alot of channels. maybe my seting is not correct. my box has always run fine until now.
medina21
I have a dish500 with a twin Dp lnb.
I have 119 set on diseqc port1 with LNB selected as OCS-DP
and 110 on port2 again OCS-DP selected.
no other switches inline.
My question is, im am missing alot of channels. maybe my seting is not correct. my box has always run fine until now.
medina21
CASPER
New member
How to Flash the 2700A without Deleting Settings or Channel List
This proceedure will keep you from deleting your antenna settings and your channel list once they are setup. I've seen this come up a number of times and thought I would post it in one place.
1. Turn the receiver off via the back switch.
2. Hook the null cable up between the pc and the receiver.
3. IMPORTANT!! Turn the receiver on via the back switch and WAIT for the receiver to boot all the way on. You should first see b-7 5 scroll across the receiver display then a quick blink 7.5 followed by On and then the last channel number that was selected.
4. Once you see the last channel number show on the receiver display then open up the loader, select the bin file and then download. Once the download complete pops up on your pc screen you should be good to go.
This will work when loading the factory bin as well. The only time you should loose the settings and the channel list is if you do a factory reset in the main menu of the receiver. You can even load the factory bin with the procedure above and once you see download complete popup on your pc screen then load the newest fix out and still not loose your settings or channel list. Hope this helps someone out.
Note: This works with the original pansat 2700A.
This proceedure will keep you from deleting your antenna settings and your channel list once they are setup. I've seen this come up a number of times and thought I would post it in one place.
1. Turn the receiver off via the back switch.
2. Hook the null cable up between the pc and the receiver.
3. IMPORTANT!! Turn the receiver on via the back switch and WAIT for the receiver to boot all the way on. You should first see b-7 5 scroll across the receiver display then a quick blink 7.5 followed by On and then the last channel number that was selected.
4. Once you see the last channel number show on the receiver display then open up the loader, select the bin file and then download. Once the download complete pops up on your pc screen you should be good to go.
This will work when loading the factory bin as well. The only time you should loose the settings and the channel list is if you do a factory reset in the main menu of the receiver. You can even load the factory bin with the procedure above and once you see download complete popup on your pc screen then load the newest fix out and still not loose your settings or channel list. Hope this helps someone out.
Note: This works with the original pansat 2700A.
Similar threads
Similar threads
