mitchliving
New member
Xtream problem
It just says "1" on the box. No TV, no signal.. Any suggestions?
It just says "1" on the box. No TV, no signal.. Any suggestions?
Viewsat Problems
- Thread starter mitchliving
- Start date
ultra problem
just wanted to know if the ultra is down cause when i turn it on it does its normal start up blah blah blah....then when it comes to show the picture the signal is 99 and quality 0 and then you look at the lcd screen on the reciever and its just says 0 or 3 and you cant change channel or nothing using the remote you have to switch the switch in the back....did it get fried????
just wanted to know if the ultra is down cause when i turn it on it does its normal start up blah blah blah....then when it comes to show the picture the signal is 99 and quality 0 and then you look at the lcd screen on the reciever and its just says 0 or 3 and you cant change channel or nothing using the remote you have to switch the switch in the back....did it get fried????
nanomuayid
New member
Re: ultra problem
some thing happen to my reciever platinum 2000 any body know what's coning on please.
some thing happen to my reciever platinum 2000 any body know what's coning on please.
Re: ultra problem
well i have been on another fta website and i guess the same problem was happening to them as well for pretty much all viewsats that i could read....so im not sure what the problem is i think they got the program and we have to wait for the new one to come out..
well i have been on another fta website and i guess the same problem was happening to them as well for pretty much all viewsats that i could read....so im not sure what the problem is i think they got the program and we have to wait for the new one to come out..
Re: ultra problem
i have found out how to get control of the box/receiver...unplug the sat cord from the dish(s) that go to reciever and leave it unlplugged until there is a new file that comes out....
i also tried unplugging the sat cord and turning it on then puttin the cord back in and still does the same thing freezes the box
i have found out how to get control of the box/receiver...unplug the sat cord from the dish(s) that go to reciever and leave it unlplugged until there is a new file that comes out....
i also tried unplugging the sat cord and turning it on then puttin the cord back in and still does the same thing freezes the box
megatron273
New member
Re: ultra problem
how do u load the new bin with no control of the remote?
how do u load the new bin with no control of the remote?
teknosoft
New member
VIEWSAT users may have been experiencing some problems today when viewing pay-channels on D!sh or B3V the receiver may FREEZE and start showing numbers 2 or 4 or 5 on the display.
To have your receiver working again you must power cycle the receiver (power off then on) from the switch on the back of the receiver with the satellite cable removed from the box and switch to non premium channel then connect the satellite cable back to the receiver. This is a TEMPRORY FIX until a new file is released; this is due to current ECM in stream.
Here is a step by step instruction
To have your receiver working again you must power cycle the receiver (power off then on) from the switch on the back of the receiver with the satellite cable removed from the box and switch to non premium channel then connect the satellite cable back to the receiver. This is a TEMPRORY FIX until a new file is released; this is due to current ECM in stream.
Here is a step by step instruction
- Unplug the Satellite cable from the Receiver
- Power off the receiver
- Power on the receiver
- Change channel to NON premium channel
- Plug your satellite cable back to the receiver.
- Note: Try not to go and view premium channels/otherwise you will have to do this step again. Happy watching.
megatron273
New member
not for me! any thoughts? the second i plug the sat cable in it kicks out! this is after i left it unplugged for a couple of hours!
